3 Important Tips For Maintaining The Final Drive Motor For A Komatsu

The performance of the final drive motor for a Komatsu is extremely important for the success of a construction project. Proper maintenance extends to the life of the final drive motor, saves money by avoiding costly repairs, and keeps the Komatsu equipment running efficiently. Discover the three important areas of maintenance in a final drive motor for a Komatsu and be sure to apply them to your pieces of equipment.

1. Check For Hydraulic Leaks
   
   A final drive can experience hydraulic leaks that can endanger the final drive motor. The easiest way to detect any leaks quickly is for the vehicle operator to do a daily walk around. Hydraulic leaks occur when a very thin fluid comes from a leaking hose or an issue in the hydraulic portion of your final drive. When there is an excessive amount of leaking fluid, it is most likely hydraulic fluid. A leaking hose is a relatively easy problem to fix. If the hydraulic leak isn’t coming from there, a clogged case drain filter or seal failure is most likely causing it.


2. Check Gear Oil Leaks And Levels
   
   The gear oil needs to be checked for leaks and proper level in order to maintain the functioning of a final drive motor for a Komatsu. You can detect a gear oil leak by checking for oil behind the sprocket or oil dripping onto the tracks of a tracked machine. Gear oil leaks are typically linked to the mechanical face seal and should be addressed immediately. For every 100 hours of operation, you should check the gear oil level in your final drive. On the cover plate of a final drive motor, there are two or three plugs. Arrange the final drive so that one plug is at the 12 o’clock position and one is at the three. Remove the plugs slowly and check that the gear oil is at a sufficient level. When the oil runs out of the three o’clock opening, it is the right level.


3. Change Gear Oil
   
   All of the Bobcat final drive gear oil should be changed at least once a year. Change the oil when the oil is warm, as it will be easier to drain out. The final drive should be arranged with the plugs at the three o’clock and six o’clock positions so that the old oil drains out of the six o’clock opening. Switch the positioning so that the plugs are at three o’clock at 12 o’clock and add fresh gear oil into the 12 o’clock opening until it reaches the three.

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and OEM-equivalent or aftermarket Bobcat 331 travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

Importance of Quality Final Drive Motors For a Komatsu Excavator

With the American construction industry projected to reach $37 billion in annual volume by 2026, according to the U.S. Department of Commerce, the need for high-quality heavy equipment from OEMs and aftermarket makers will no doubt continue to come into play over the next several years. Komatsu, the world’s second-largest construction equipment manufacturer behind Caterpillar, will likely see an increased demand for its products as the industry expands.

For years, Komatsu Limited has been a major contributor to the global construction equipment sector. Thanks to high-quality components like Komatsu final drive motors with travel motors, their excavators are extremely powerful, reliable, and effective for a wide range of construction-related projects.

Based in Japan, century-old Komatsu enjoys a solid reputation for producing robust and reliable heavy machinery that sees use across a wide variety of industries, including construction, mining, and forestry. The company began U.S. operations in 1970, and its heavy equipment is used across industries. In particular, Komatsu forklifts are a common sight at warehouses, storage facilities, and docks. Other construction equipment and equipment parts sold by Komatsu include:

• Track Loaders
• Skid Steers
• Excavators and Mini Excavators
• Bulldozers
• Electric Rope Shovels
• Motor Graders
• Continuous Miners
• Travel Drives
• Hydraulic Pumps
• Gearboxes
• and more

If you’re utilizing any of these powerful machines for construction jobs, it’s important to choose an excavator parts supplier with the right final drive motors for a Komatsu.Since excavators are such an important part of the construction sector, you should be aware of these machines and their performance abilities. Here is some information on Komatsu excavators.

Komatsu Excavator Overview

Highly regarded for versatility on the job, an excavator is an effective tool for the construction trade. Let’s look at an overview of Komatsu excavator offerings based on size.

Small Excavator: Up to 25,000 lbs

Komatsu eschews the “compact or mini excavator” label and just calls equipment in this weight range “small.” It begins with the PC30MR-5 that features 24.4 horsepower and a bucket capacity of up to 0.21 cubic yards. The PC88MR-11 bookends the top part of Komatsu’s small excavator range with 68 horsepower and a 0.26 cubic yard bucket.

Mid-Size Excavator: 25,000 – 70,000 lbs

When a small or mini excavator just won’t do, mid-size models offer extended capabilities. The range begins with the PC130-11 at 92.2 horsepower and 0.78 cubic yards of bucket capacity and ends with the PC290LC-10 that features 196 horsepower and a 0.75 cubic yard bucket.

Large Excavator: 70,000 – 260,000 lbs

Large Komatsu excavators begin with the PC360LCi-11 and its 257 horsepower and 2.56 cubic yard bucket. The PC1250LC-11 maxes out this category at 758 horsepower and a bucket capacity of up to 9.5 cubic yards.

Mining Excavator: 260,000 lbs and Above

Komatsu’s specialized excavators are created to meet the unique needs of the mining industry. These massive pieces of machinery make even large excavators look like toys in comparison. The company’s “tiniest” mining excavator, the PC2000-11, benefits from 1,058 horsepower and a bucket up to 17.9 cubic yards. The enormous PC8000-6 weighs as much as 1.7 million pounds and relies on two 2,010-horsepower diesel engines; its 55-cubic yard bucket is large enough to fill the cargo beds of 18 pickup trucks.

Help with a Komatsu Final Drive

Even sturdy and reliable Komatsu excavators will need a replacement final drive motor at some point. Final drives do wear out over time. So, let’s look at some indicators that a replacement Komatsu final drive is in your future.

Contamination

Dust and debris are the arch enemies of all things mechanical. Unfortunately, this is just the environment where a final drive sees use. Contamination of final drive motor interior components is just waiting to happen thanks to regular, ordinary activities. This usually occurs through contaminated hydraulic fluid. And, yes, filters are supposed to screen out these particles, but no system is perfect.

Missing Cover Plate

A missing or damaged cover plate is usually caused by excessive hydraulic pressure in the final drive motor. Most of the time, this is the result of a clogged drain filter. When cover plate damage gets to this point, it usually means the final drive has suffered extensive damage beyond repair.

Excessive Noise

Sure, construction equipment is noisy. But, we’re talking about noise that’s not normal. This is a clear indicator that something is wrong. Your equipment operators should be trained to be on the alert for this early warning sign. Causes can be due to contamination or worn-out interior components. A high-pitched squealing noise usually means that a weak charge pump impedes the travel motor’s proper operation, and you will soon be looking for a replacement.

Overheating

Overheating is a classic symptom of a final drive motor that will soon be history. Just like paying attention to strange final drive noises, excavator operators should be aware that a too-hot-to-touch travel motor means there’s a problem. This can be caused by various conditions, including worn-out bearings, overheated hydraulic fluid, brake problems, or low gear oil.

Replacing a Komatsu Final Drive

Final drives for a Komatsu can help ensure that these powerful machines function correctly and perform precisely as they should for your business.Reach out to us at MiniFinalDrives.com to learn more about final drive motors for your Komatsu construction equipment. Final drive parts are available for other brands, including Bobcat, Doosan, Hitachi, John Deere, and Kubota, Hyundai, IHI, Kayaba KYB, New Holland, Sumitomo, Volvo, and more.

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door .

Important Dimensions and Specifications of the Takeuchi TB145 Excavator

In 2009, the revenue of machinery maintenance and heavy equipment repair services in the U.S. totaled around $29 billion. As the construction equipment industry is expected to increase 12% from 2016 to 2016, the functionality and maintenance needs of these machines will become even more important.

Perhaps one of the most popular and highest quality pieces of construction machinery has become the Takeuchi TB145. Takeuchi Manufacturing is a Japanese heavy machinery company whose products include mini excavators, hydraulic excavators, and crawler loaders. For these machines to work properly, keep in mind that their final drive motors need to taken care of and properly handled.

The Takeuchi TB145 is a midi excavator that is powerful, efficient, and relies on final drive motors. Here are some of the dimensions and specifications of the Takeuchi TB145 excavator:

• Shipping length of unit — 18.5 ft


• Max loading height — 13.67 ft


• Max reach along ground — 19.75 ft


• Max vertical wall riffing depth — 10 ft


• Max digging depth — 12.5 ft


• Width to outside of tracks — 6 ft


• Length of track on ground — 6.5 ft


• Ground clearance — 1.08 ft


• Height to top of cab — 8.42 ft


• Tail swing radius — 4.83 ft


• Undercarriage shoe size — 15.7


• Number of cylinders — 4 cylinders


• Engine make and model — 2348 — 4TNV88-QTB


• Gross power — 37.5 horsepower


• Max torque — 107 pounds


• Operating weight — 10,761 pounds


• Fuel capacity — 19.3 gal


• Operating voltage — 12 volts


• Swing speed — 9.9 revolutions per minute


• Ground pressure — 3.9 psi


• Max travel speed — 3.1 mph

If you want to learn more about the Takeuchi TB145, hydraulic travel motors, or tending to your machine’s drive motors, there is only one place to go to ensure you’re getting the best Quality, Value, and Service: Mini Final Drives.

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

Taking a Look at John Deere 50D and 50C ZTS Midi Excavators

Excavators, which have a net power range from 14.5 horsepower to 512 horsepower, are essential for modern construction projects. Both minor jobs and major tasks can require digging, excavating, and all kinds of heavy lifting — and excavators are perfect for these performances.

There are plenty of quality construction equipment manufacturers on the market today, but John Deere reigns supreme. There are two John Deere midi excavators that provide excellent performance and are great for construction projects of all sizes: John Deere 50D and 50C ZTS. With their hydraulic final drive travel motors, innovative design, and powerful capabilities, these machines provide exceptional performance.

Let’s take a look at what makes these two machines standout on the market:

John Deere 50D Midi Excavator

This machine is a compact excavator that specializes in close-quarters work. It’s both quiet and highly fuel-efficient, enabling operators to use it anytime, anywhere, for any construction job.

• Shipping length — 17.93 ft.


• Shipping Height — 9.24 ft.


• Max Loading Height — 13.42 ft.


• Max Cutting Height — 18.71 ft.


• Max Digging Depth — 11.75 ft.


• Track Length — 6.5 ft.


• Ground Clearance — 1.11 ft.


• Undercarriage Shoe Size — 15.75 in.


• Net Power — 39.9 horsepower.


• Fuel Capacity — 18.5 gallons.


• Operational Weight — 10,428 lb.


• Max Travel Speed — 2.8 mph.

John Deere 50C ZTS Midi Excavator

This mini excavator is equipped with heavy duty hydraulic travel motors and is very durable.

• Shipping length — 17.43 ft.


• Max Loading Height — 11.5 ft.


• Max Cutting Height — 16.93 ft.


• Max Digging Depth — 11.83 ft.


• Track Length — 8.08 ft.


• Ground Clearance — 1.08 ft.


• Undercarriage Shoe Size — 15.75 in.


• Net Power — 38 horsepower.


• Fuel Capacity — 13.2 gallons.


• Operational Weight — 10,565 lb.


• Max Travel Speed — 2.8 mph.

If you want to learn more about John Deere 50D, John Deere 50C ZTS, and other final drive motors and hydraulic travel motors, there is only one place to go:

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at http://www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

Other related final drives:

• John Deere 235185 Final Drive Motor
• John Deere 4420996 Final Drive Motor
• John Deere 4420998 Final Drive Motor
• John Deere 4433991 Final Drive Motor
• John Deere 4437816 Final Drive Motor
• John Deere 4438716 Final Drive Motor
• John Deere 4466796 Final Drive Motor
• John Deere 4614213 Final Drive Motor
• John Deere 4628892 Final Drive Motor
• John Deere 4642389 Final Drive Motor
• John Deere 4654367 Final Drive Motor
• John Deere 4671390 Final Drive Motor
• John Deere 4691488 Final Drive Motor
• John Deere 4691489 Final Drive Motor
• John Deere 9238015 Final Drive Motor
• John Deere 9257751 Final Drive Motor
• John Deere AT110503 Final Drive Motor
• John Deere AT255947 Final Drive Motor
• John Deere FYD00005956 Final Drive Motor
• John Deere FYD00006788 Final Drive Motor
• John Deere FYD00011248 Final Drive Motor
• John Deere TH4420996 Final Drive Motor
• John Deere TH4420998 Final Drive Motor
• John Deere TH4438716 Final Drive Motor

The construction equipment industry is projected to grow 12% from 2016 to 2026. From replacing hydraulic travel motors to shipping excavator drive motors, this sector is imperative for all sorts of industrial and constructional growth. Takeuchi Manufacturing is a Japanese heavy machinery company that produces excavators throughout the United States, United Kingdom, France, China, and all other the world.

The excavator is one of the most important machines within the global construction sector. Evacuators come in three sizes: large, mid-size, and compact. Takeuchi was the first company to introduce the compact excavator to North America, setting the stage for one of the highest growth product segments that the worldwide compact equipment market has ever seen. The compact excavator market has actually grown to become a main line product for construction, utility, and rental organizations. Here’s a look at one of the most efficient compact excavator on the market today:

Takeuchi TB135

The Takeuchi TB135 is a machine model compact excavator equipped with quality travel motors.

Here are some important dimensions, specifications, and essential information about Takeuchi TB135 compact excavators:

• Shipping length of unit — 16.6. ft.


• Max loading height — 12.5 ft.


• Max digging depth — 11.2 ft.


• Max vertical wall digging — 8.6 ft.


• Width to outside of tracks — 5.3ft.


• Ground clearance — 0.97 ft.


• Undercarriage shoe size — 14 in.


• Engine make and model — Yanmar – 3TNV88-QTB.


• Gross power — 27.8 horsepower (2,300 revolutions per minute).


• Number of cylinders — 3.


• Operating weight — 7,831 pounds.


• Hydraulic system relief valve pressure — 3,000 PSI.


• Fuel capacity — 1.3 gallons.


• Max travel speed — 2.9 miles per hour.

If you’re serious about finding a quality Takeuchi TB135 or other high performing excavators with functioning travel motors, there is only one place to go that highlights quality, value, and service:

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

Construction Equipment Outlook: Comparing the Komatsu PC45MR & PC50MR

The Komatsu corporation is one of the most respected construction equipment companies in operation today. Founded in 1921, they have grown to offer a variety of construction solutions, and their excavators have remained popular due to their low engine emissions and ease of transport.

Excavators are among the most versatile pieces of construction equipment in the industry today. They come in three sizes: compact (often called a “mini-excavator”), mid-size (“midi-excavator”), and large.

Mini-excavators can be used for tasks as small as landscaping, while large excavators can be found at larger job sites such as mining sites, where mining excavators are used for their high capacity, size, and reliable performance.

Construction equipment is a multi-billion-dollar industry, and it’s expected to continue growing. If you’re in the industry, it’s important to be familiar with some of the leading tools. Let’s take a look at two Komatsu mini excavators: the PC45MR and the PC50MR. Both the PC45MR and the PC50MR are crawler excavators, which makes them a bit more versatile than wheel loaders. But the two products offer slightly different performance and features.

Komatsu PC45MR

The Komatsu PC45MR’s Performance

This tight-tail-swing compact excavator is great for general contractors performing contraction-related tasks. It fits on an 80-inch deck trailer, which means it’s more convenient than a larger excavator or even a backhoe for transport, and it delivers powerful performance. Equipped with a clean engine, this excavator can actually provide environmental benefits, as it complies with the EPA’s Tier 4 Final Emissions Regulations. Its engine utilizes eco-friendly technologies, including an electronically-controlled cooled Exhaust Gas Recirculation (EGR) system, optimum fuel injection system using a common rail, and an exhaust gas after treatment system. By utilizing these innovative technologies, the PC45MR can not only perform powerful excavating tasks, but can reduce up to 5% of your fuel consumption, as well.

The Komatsu PC45MR’s Specifications and Features

Here are some of the features and specs you’ll get with the PC45MR:

• Engine Type: Water-cooled, 4-cycle, direct injection, cooled EGR
• Aspiration Type: Naturally aspirated
• Stroke: 90 millimeter 3.54″
• Piston Displacement: 2.19 L
• Rated RPM: 2400
• Governor: All-speed control, electronic
• Steering Control: Two levers with pedals (hydrostatic drive method)
• Travel Speed: 1.6 – 2.9 MPH
• Operating Weight: 10,737 – 11,001 lbs
• Horsepower: 38 @ 2800 RPM
• Bucket Capacity: 0.07 – 0.21 cubic yards
• Digging Depth: 12.5 ft (4 m)
• Track Type: Rubber tracks
• Track Width: 400 mm
• Tail Swing Radius: 3.4 ft (1.04 mm)

Operators also have the option of adding a quick coupler to this excavator, which can improve versatility on the job site.

The Komatsu PC50MR

The Komatsu PC50MR’s Performance

The Komatsu PC50MR is another great machine, but it comes with some key differences.

For individual construction workers and smaller organizations that need to dig holes for various reasons, the PC50MR is ideal. This excavator is small enough that it can be hauled behind a mid-size pickup truck and taken to a job site with minimal hassle where it can perform all sorts of construction and landscaping tasks.

It also offers a great deal of engine power for its size, making it an improvement over models such as the Komatsu PC18MR-3 or the PC35MR-5. This excavator is also known for its versatility, as well as its comfort and ease of use.

The Komatsu PC50 MR’s Features and Specifications

Here are some of the features you can expect from the PC50MR:

• Engine Type: Water-cooled, 4-cycle, direct injection, cooled EGR
• Aspiration: Naturally aspirated
• Stroke: 90 millimeter 3.54″
• Piston Displacement: 2.19 L
• Rated RPM: 2,350
• Governor: All-speed control, electronic
• Steering Control: Two levers with pedals (hydrostatic drive method)
• Travel Speed: 1.7 – 2.9 MPH
• Operating Weight: 10,485 – 11,585 lbs
• Horsepower: 40.6 HP @ 2,350 rpm
• Bucket Capacity: 0.09 – 0.23 cubic yards
• Transport Length: 5.6 m (18.4 ft)
• Digging depth: 15 ft
• Track Type: Rubber tracks
• Track Width: 400 mm
• Tail Swing Radius: 3.3 ft (1m)

Operators will enjoy the surprisingly spacious cab, and a radio or air conditioning can be installed as optional features. The closed load-sensing system (CLSS) also offers exceptional power and control over the machine, making the hydraulic excavator controls some of the most reliable in the construction equipment industry.

Contact Mini Final Drives

It’s important to note, that hydraulic travel motors are extremely important for excavators. If you want to find a quality final drive motor for Komatsu excavators, including used Komatsu parts, or if you’d like to learn more about how to check for final drive leaks, bearing oil levels, and drain filter performance, there is only one place to go for the best Quality, Value, and Service: Mini Final Drives.

At Mini Final Drives, we’re proud to carry products from Komatsu, alongside other quality products from Bobcat and John Deere. Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

3 Tips For Taking Better Care of Your Caterpillar Final Drive Travel Motor

Caterpillar machines are great for all kinds of construction tasks and landscaping projects. Though you should make sure that each and every aspect of your heavy machinery is functioning properly, it’s best to give a little more attention and care to your Caterpillar final drive travel motor.

Preventative maintenance can often save you from having to perform a costly repair down the road. It can also ensure that your construction equipment is operating as efficiently as possible.

In this article, we’ll cover three tips to keep in mind when it comes to taking care of your Caterpillar final drive travel motors.

Checking and Changing the Gear Oil

One of the most important aspects of troubleshooting your final drive motor in your Caterpillar excavator or track loader is to pay attention to the gear oil. This oil should be inspected at least once a month or after 100 hours of operation. However, you may do this even more often if your machine has been involved in constant, heavy work.How do you check your gear oil level? Your individual machine may vary, but Caterpillar owners can generally do the following:

• Remove debris and dirt from the plugs on the cover plate
• Remove plugs from the cover plate slowly
• Ensure that the final drive oil is level with the 3 o’clock opening

You can either top off your final drive gear oil or replace it altogether at this point. If you choose to replace the oil in your final drive, you can simply drain your oil out. As you do so, check to be sure there are no metallic shavings, flakes, or other visible contaminants in the oil, as this could indicate a problem inside the gear hub that requires service. You can then add fresh gear oil and replace the plugs.

You should perform a gear oil change after every 200 hours of operation, though it’s always wise to change the oil more often if you’ve been using your Caterpillar excavator for any major excavation projects.

Pay Attention to Leaks

Never ignore leaks coming from the final drive of your excavator. There are two types of leaks you should be concerned about: A hydraulic leak and a gear oil leak.

A Hydraulic Leak

A hydraulic leak will usually come from a leaking hose or a problem with the hydraulic components of the final drive itself. A leaking hose is an easy fix. In other cases, there may be a problem with the hydraulic portion of the final drive, which may require additional service or replacement parts.

A Gear Oil Leak

Gear oil leaks are usually found by checking for oil behind the sprocket or dripping on the tracks (if your Caterpillar machine runs on tracks). Gear oil leaks are usually tied to the mechanical face seal and should be addressed as quickly as possible, as a build-up of sludge could result in further damage to the components of your final drive motor. Both of these types of leaks can become catastrophic if they are not addressed immediately. The sensitive components of your final drive require special attention. Neglecting these types of maintenance protocols could lead to larger, more costly failures in the future, arising from the friction of mechanical parts rubbing together.

Trust MiniFinalDrives.com for Your Final Drive Travel Motor Solutions

Of course, we also recommend that you document any maintenance you perform (including the part number of any items you service or replace), as this can make it easier to file warranty claims.

At MiniFinalDrives.com, we provide customers with quality aftermarket and OEM-equivalent parts for today’s leading brands of heavy equipment, including Caterpillar, Hitachi, John Deere, and Komatsu.

We can provide you with a new final drive using aftermarket parts and can even obtain hard-to-find parts and accessories for all of your construction needs.

For additional information, call us today at 877-483-2806, or visit our online store at http://www.minifinaldrives.com to find and order what you need today for fast and free delivery right to your door.

Other related final drives that we offer include

• Caterpillar 096-6774 Final Drive Motor
• Caterpillar 096-6836 Final Drive Motor
• Caterpillar 102-6410 Final Drive Motor
• Caterpillar 102-6420 Final Drive Motor
• Caterpillar 102-6458 Final Drive Motor
• Caterpillar 102-6460 Final Drive Motor
• Caterpillar 102-6470 Final Drive Motor
• Caterpillar 102-6947 Final Drive Motor
• Caterpillar 114-1555 Final Drive Motor
• Caterpillar 144-5196 Final Drive Motor
• Caterpillar 145-4246 Final Drive Motor
• Caterpillar 146-5496 Final Drive Motor
• Caterpillar 148-4567 Final Drive Motor
• Caterpillar 148-4736 Final Drive Motor

The construction equipment industry is projected to grow 12% from 2016 to 2026. From replacing hydraulic travel motors to shipping excavator drive motors, this sector is imperative for all sorts of industrial and constructional growth. Takeuchi Manufacturing is a Japanese heavy machinery company that produces excavators throughout the United States, United Kingdom, France, China, and all other the world.

The excavator is one of the most important machines within the global construction sector. Evacuators come in three sizes: large, mid-size, and compact. Takeuchi was the first company to introduce the compact excavator to North America, setting the stage for one of the highest growth product segments that the worldwide compact equipment market has ever seen. The compact excavator market has actually grown to become a main line product for construction, utility, and rental organizations. Here’s a look at one of the most efficient compact excavator on the market today:

Takeuchi TB135

The Takeuchi TB135 is a machine model compact excavator equipped with quality travel motors.

Here are some important dimensions, specifications, and essential information about Takeuchi TB135 compact excavators:

• Shipping length of unit — 16.6. ft.


• Max loading height — 12.5 ft.


• Max digging depth — 11.2 ft.


• Max vertical wall digging — 8.6 ft.


• Width to outside of tracks — 5.3ft.


• Ground clearance — 0.97 ft.


• Undercarriage shoe size — 14 in.


• Engine make and model — Yanmar – 3TNV88-QTB.


• Gross power — 27.8 horsepower (2,300 revolutions per minute).


• Number of cylinders — 3.


• Operating weight — 7,831 pounds.


• Hydraulic system relief valve pressure — 3,000 PSI.


• Fuel capacity — 1.3 gallons.


• Max travel speed — 2.9 miles per hour.

If you’re serious about finding a quality Takeuchi TB135 or other high performing excavators with functioning travel motors, there is only one place to go that highlights quality, value, and service:

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door.

Taking Care of Your Final Drive Motor For a Komatsu Excavator

Final drive motors for a Komatsu excavator need to be maintained and operated correctly in order to ensure the machine’s power and efficiency.

When it comes to Komatsu excavators and similar machines, you need to ensure that you’re properly handling their final drive motors. So how can you take care of final drive motors for a Komatsu excavator?

First, you need to inspect your final drive gear oil at least once a month or after 100 hours of operation. Also, it’s important to change your Komatsu’s final drive gear oil at least once a year.

Additionally, though some excavator operators believe grease is a quick and easy solution to a leaking seal, you should never use grease as a replacement to final drive motors. Using grease instead of oil can only provide temporary relief, and will lead to serious problems down the line. If grease is packed into the final drive’s gear hub, there are two possible scenarios that will take place:

Excessive Lubricant

Too much grease will result in churning, which subsequently leads to the gears and bearings being forced to overcome the resistance that comes along with high speeds and all that extra grease. Grease packing where oil is supposed to be used will, in turn, lead to a destructive cycle of overheating and increased friction.

Lubricant Starvation

When it comes to final drive motors for a Komatsu, there needs to be enough lubricant distributed throughout to protect all the components within the gear hub. The grease will stay where it is and won’t distribute evenly like gear oil does. Additionally, if you’re using grease, when the final drive starts up, it will likely dry run because the majority of the grease will have begun to settle, thus not providing enough lubrication to protect everything during operation or startup.

Let’s take a look at two Komatsu mini excavators that offer exceptional performance:

Komatsu PC35MR-2

• Net Power — 29.1 horsepower.
• Operating Weight — 8,245 lb.

Komatsu PC35MR-3

• Net Power — 29 horsepower.
• Operating Weight — 7,909 lb.

Our family at Mini Final Drives has been providing excellent Quality, Value, and Service for over 50 years, and you can continue to count on us for a lifetime of friendly, helpful support for all your final drive and travel motor needs. Call us today at 877-483-2806 or visit our online store at www.minifinaldrives.com to find and order what you need today for Fast and Free delivery to your door